Technical Specification:

Method of Detection                    : Conductometric / Volumetric

Range of Moisture Detection         : Better than 50 ppm to 100% (depends upon type of sample)

Display of Reading                       : Moisture in ppm, percentage (%), mg/ml of water, gm/L, Mol/L

Display                                       : 20 x 4 Line Alphanumeric Backlit LCD

Magnetic Stirrer                           : Built-in with soft touch Key speed controller

Keypad                                       : Membrane waterproof polycarbonate soft touch keypad compliance to UL/ROHS

Method                                       : Three pre-assigned method

  1) liquid by volume,

  2) liquid by weight

  3) for solid sample

  Method No. 4-40 are customized with View, Print & Delete facility.

Calibration                                  : Average factor can be calculated by

  1) water by volume,

  2) water by weight

  3) By DST

Stirring Time                               : 00:00 to 99:00 (mm : ss) – users adjustable

End Point Time                           : 1-20 seconds - users adjustable

Auto Neutralization                      : On / Off - users selectable - reduces the time between analyses & gives accurate results

Material of Construction               : Epoxy Based Powder Coated Metallic Body

Type of Electrode                        : Dual Platinum - Combined Type

Type of Dispenser                     : Motorized - For accurate measurement

OVER TITER Facility                    : Audio / Visual Alarm at 15 ml to save KF Reagent

MOC of Dispenser                      : SS-316L & Teflon for Corrosion Protection & Maintenance Free Operation

Dispenser Calibration/Validation : Onsite by users

Flushing Mode                           : For cleaning dispensing path

Teflon Tube                               : To transfer KF reagent from KF reagent bottle to dispenser & dispenser to

  reaction vessel

Auto Drain Facility                      : For cleaning reaction vessel - useful for large & multiple volume sample

Input                                        : Electrode with Banana Connector

Short Link                                 : Provided to diagnose the problem either with Instrument OR Electrode

End Point Detection                    : By Audio & Visual Alarm

Calibration Reminder Alarm         : 0-99 Hours

Calculation of % RSD              : Possible

Average KF Factor Calculation: Automatic – Maximum 10 factor can be stored in memory

Weight Entry                            : In Resolution of 0.1 mg / 0.01 mg – users Selectable

Weight Transfer                       : Possible through RS-232 Port (From Balance to AKF)

Balance Interface                    : Yes with RS-232 Port

Calibration Data Storage          : Non-Volatile Memory which can store, print & view calibration date & time, calibration

  method, calibration done by, stirring time, average KF factor, calibration done on,

  instrument serial number, instrument ID etc.

Searching of data                      : with record number, batch number, Date and by scrolling

Report Formation                      : As per GLP Compliance

Analysis Data Storage             : More than 1500 analysis data, with corresponding calibration data company, name,

  analysis date & time, record number, batch / ID number, sample name, user name,

  sample type and method, sample volume (ml / mg), sample density (for liquid sample),

  stirring time, end point time, end point in ml, moisture result in %, ppm & H2O (mg /

  ml), analysis done on, instrument serial number, instrument ID etc. Secondly, analysis

  data can print directly from analysis mode without saving analysis data in instrument.

  saving analysis data in instrument.

 21 CFR Part-11 Compliance       : ● In-built with system

  • 1 Admin and 7 users with different Login ID & Password.

  ● Audit trail can store more than 5000 lines in system itself.

  ● Audit trail includes action taken, date & time, action taken by whom.

  ● Audit trail can be transfer to PC through ANALABsafe software and  

     can print on 40 / 80 column dot matrix printer for record.

  ● Once Audit trail transfer to the PC or Printer, automatically system

     will delete Audit trail records and before final deleting, the system

     will give warning twice.

Printer Interface                        : Centronics Parallel Port / Serial (RS-232 C) Port

PC Interface                           : USB Type - B

Printer                                   : 40 / 80 Column Dot Matrix Printer (Printer have to procure optionally)

PC Connectivity                         : By USB Interface Cable with Driver, ANALABsafe software to transfer Analysis data in

              GLP formate, Calibration data and Audit trail from Instrument to PC in non editable

  formate and is password protected.

Power Supply                            : 230 VAC ±10%, 50 Hz