Technical Specification:

Element Range                           : Na, K, & Li : 0.1-200 ppm, Ca : 15-300 ppm, Ba : 50-3000 ppm

Sensitivity                                  : Na: 0.5 ppm, K: 0.5 ppm, Li: 0.5 ppm, Ca: 15 ppm, Ba: 50 ppm

Filter Selection                            : Automatic by soft touch key

Resolution                                  : 0.1 ppm

Detector                                    : Silicon Photodiode

Linearity                                    : Better than 2%

Unit of Measurement                    : ppm/ mg/l/ meq/l and mmol/l

Reproducibility                            : <1% Coefficient of Variation (CV) for 20 consecutive samples using 10 ppm Na set as

maximum standard “Curve Fitting Accuracy<1% error when 3 ppm Na/K and 5 ppm Li are sets maximum standards.

Quick Calibration Facility               : With Highest standard

Method                                      : 40 method with View, Print & Delete facility

Calibration                               : Up to 05 standards per Element with Curve Fitting Software in built with

  Instrument. (Automatic calculation of curve coefficient)

Calibration of Sample                : Multi elements in single aspiration OR one by one.

Analysis of Sample                    : Multi elements in single aspiration OR one by one.

Ignition System                        : Automatic

Auto LPG Shut-off at Power Off : Safety feature in case of sudden power failure

Flame Type                                : LPG & Dry Oil Free Air

Auto Flame ON / OFF Detection      : Yes Audio and Visual Alarm

Display                                      : 20 x 4 Line Alphanumeric LCD with Backlit

Keypad                                      : Membrane waterproof polycarbonate soft touch keypad compliance to UL/ROHS

Gas Control                                : Adjustable with Regulator

Atomizer                                    : Axial Flow Type

Air Supply Unit (In-built)          : Consist of Air Compressor, Pressure Gauge, Pressure Regulator, Moisture

  Filter, PU Tube (2 Meters) and Air filter with moisture absorbent catalyst

Error Messages                         : “LPG On/Off”, “Wrong Standard”, “Home Detection”, “Memory Full”, “Flame

  Not ON”, “Value Out of Limit”, “Do Warm-up” & “In Correct Standard”.

Calibration Data Storage               : Non Volatile Memory which can store, print & view last calibration data, calibration date

  & time, company name, calibration done by, calibration standard etc.

Searching of data                        : with record number, batch number, Date and by scrolling

Report Formation                        : As per GLP Compliance

Analysis Data Storage                   : More than 1500 analysis data can be stored with corresponding calibration data with

  batch number, users name, sample name, instrument serial number, instrument ID,

  model number, sample type, display of calibration standard, calibration date& time,

  Analysis date & time, display of reading in ppm etc. Secondly, analysis data can print

  directly from analysis mode without saving analysis data in instrument.

21 CFR Part-11 Compliance       : ● In-built with system

  ● 1 Admin and 7 users with different Login ID & Password.

  ● Audit trail can store more than 5000 lines in system itself.

  ● Audit trail includes action taken, date & time, action taken by whom.

  ● Audit trail can be transfer to PC through ANALABsafe software and  

     can print on 40 / 80 column dot matrix printer for record.

  ● Once Audit trail transfer to the PC or Printer, automatically system

     will delete Audit trail records and before final deleting, the system

     will give warning twice.

Printer Interface                          : Centronics Parallel Port / Serial (RS-232 C) Port

PC Interface                               : USB Type - B

Printer                                       : 40 / 80 Column Dot Matrix Printer (Printer required to procure optionally)

PC Connectivity                           : By USB Interface Cable with Driver, ANALABsafe software to transfer Analysis data in

  GLP format, Calibration data and Audit trail from Instrument to PC in non-editable

  format and is password protected.

Power Supply                              : 230 VAC ± 10%, 50 Hz