Technical Specification:

Conductivity Range                      : 0 to 20.00, 200.0, 2000 µS/cm; 2 to 20.00, 200.0 mS/cm

  (Range value change depending upon cell selection)

Conductivity Resolution                 : 0.001,0.01,0.1 µS/cm & 0.001, 0.01, 0.1mS/cm

TDS Range                                 : 0 to 10, 100, 1000, 10000, 100000 ppm (Depending upon Cell Constant & TDS factor)

TDS Resolution                           : 0.001, 0.01, 0.1 ppm & 0.001, 0.01 ppt (1ppt=1000ppm)

Resistivity Range                         : 0 to 20.0, 200.00, 2000 KO, 2.00 to 20.0, 200 MO

Resistivity Resolution                    : 0.001, 0.01K & 0.1 O

Salinity                                      : 0.01 to 80000.0 ppm NaCl

Temperature Range                     : 0 to 130°C

Temperature Resolution                : 0.1°C

Temperature Compensation           : Auto / Manual

Temperature Coefficient               : 0-10.000 % per °C (Adjustable) Five – One Per Range

Temperature Calibration           : Onsite by users with in-built software

Display                                      : 20 x 4 Line Alphanumeric Backlit LCD.

Range Selection                          : Auto / Manual

Keypad                                      : Membrane waterproof polycarbonate soft touch keypad compliance to UL/ROHS.

Reading                                     : Conductivity at actual temperature and at 25°C, TDS, Resistivity & Salinity with scrolling

  display

Number of Range                      : Five

Calibration Standard                 : Five Conductivity & TDS Standard - One Per Range

Calibration Factor                     : Five – One Per Range

Error Messages                         : “Wrong Standard / Cell”, “Cell Short”, “Cell Open”, “Try Upper Range”, “Try

  Lower Range” & “Temperature Probe Error”.

Suitable Cell Constant                   : 0.1,0.5 & 1.0 K

Adjustable Cell Constant               : 0.09 to 0.11 K, 0.452 to 0.55 K & 0.90 to 1.1 K

Password Protection                 : Date & Time, Calibration Mode & Delete Stored Analysis Data (Different

  Passwords)

Conductivity to TDS Conversion Factor : 0.40000 to 1.00000 (Adjustable)

Calibration Data Storage               : Non Volatile Memory which can store, print & view with calibration date & time, cell

  constant, calibration range, standard conductivity solution, measured conductivity at

  25°C & actual temperature, calibration factor, instrument serial number, instrument ID,

  model number etc.

Report Formation                        : As per GLP Compliance.

Analysis Data Storage                   : More than 1000 analysis data can be stored with corresponding calibration date &

  time, company name, sample name, sample batch/ID, conductivity at 25°C and

  conductivity at actual temperature, conductivity to TDS conversion factor, TDS,

  resistivity, salinity, instrument serial number, instrument ID, model number etc.

  Secondly, analysis data can print directly from analysis mode without saving analysis

  data in instrument.

Printer Interface                          : Centronics Parallel Port / Serial (RS-232 C) Port

PC Interface                               : USB Type - B

Printer                                       : 40 / 80 Column Dot Matrix Printer (Printer have to procure optionally)

PC Connectivity                           : By USB Interface Cable with Driver, ANALABsafe software to transfer Analysis data in

  GLP format, Calibration data and Audit trail from Instrument to PC in non editable

  format and is password protected.

Power Supply                              : DC Adaptor