Product Details

Main Impeller & Drive :

The main impeller have speed 750/1500 synchronous dual HP motor, connected through a belt drive to a worm reduction gearbox with chain coupling
Main impeller provides mixing of material at center and bottom of bowl, driven through a specially designed bearing housing that provides inside wash facility and prevents leakage of material frombottom, resulting into long lasting Gearbox

Main Bowl & Bowl Cover :

Bowl and Beaters are made of SS 304 designed in 3 sections i.e. Flat bottom, cylindrical middle portion and conical top
Bowl Cover with counter balance lid. Cover has vents, view ports and charging options

Chopper Blade :

The Chopper Blade get drives from HP Dual speed 1500/3000 RPM synchronous speed motor
The motor shaft is made of S.S. and chopper blade is specially designed has 4 blades S.S. Impeller
The motor shaft is made of S.S. and chopper The chopper blade is coupled with motor and whole assembly is mounted horizontally with bowl

Platform :

Mounting Platform made of robust M.S. channel frame, becomes housing of Drive Assembly under the platform
S.S. staircase and railings are provided for the platform & staircase
All sides are covered with S.S. covers

Control Panel :

The control panel is mounted on platform and contains followings

Pneumatic System :

Pneumatic system is used for Operating the discharge valve(opening & closing)
The system consists of an air filter pressure gauge a 2 way solenoid valve (for discharge valve) and other pipes ferrules & pneumatic fittings

SALIENT FEATURES :

Machine can be provided with loading & unloading units to make an assembly line & reduce material handling (Optional Feature)
Main Bearing Housing provided with 3 nos Oil Seals and sleeve to minimize powder leakages / cross contamination
Main panel provided with pressure switch control for proper functioning of the machine at desired pressure of air only to prevent powder entry into impeller and eliminates jamming of impellers
To eliminate powder entering the seal Air purged shaft seals are provided
Built in cleaning system for both shaft seals
Taper lock pulley on main drive to reduce vibration and better transmission efficiency
Layouts to suit individual requirements possible
Chopper motor with built in S.S. shaft to eliminate roller, bearings and reduce maintenance
Discharge plunger provided with 3 position solenoid valve to open and close at desired levels, thereby regulating the discharge and preventing discharge of large lumps