The blower situated on the exhaust side of the dryer operates no negative pressure principle, which creates the induced draught and sucks in the fresh air into the dryer. A stream of hot filtered air is introduced from the bottom of product container containing the wet material. This container is provided with the air distribution plate and Dutch sieve. The air stream is passed through the bed of the material and fluidizes the product particles by creating the turbulence in the product container. Due to fluidization each particle gets surrounded by hot air, which leads quick & uniform heating and drying. Filter bags provided at the top prevent escaping of particles from the machine.
Salient Features Tri level filtration using 10 micron for Pre Air filtration 3 micron for Secondary Air filtration.3 micron for Final Air filtration through HEPA.Air Dehumidification on special demand.Inlet / Outlet dampers have proportional control valve.Proportional control temp controller.Inlet / Exhaust Location: Several alternatives to suit customer requirements.Wash in place.Control By PLC monitor as optional.Specially designed explosion flaps.2 Pneumatic Cylinders 1 for the Bag Up and Down movement and the other for Impact Bag Shaking.Specially designed Broken Bag Detector.Double skinned SS 304 AHU with a built in Face and By Pass damper for ± 1° Temperature control.Specially designed anti static anti sparking blower.High static high efficiency blower installed.Ergonomically mounted observation windows provided for viewing drying operation.Optional Features Additional Product container.Advance PLC controls with touch screenDouble scan AHU with Dehumidifier.Steam or Electric HeaterExhaust AHU with FilterSilencer at exhaust blower.CIP - WIP system.Explosion proof motor and push button.Solid flow detection System.Differential Pressure gauge for filter.Standard model machine with contact parts in S.304 & Non contact parts epoxy painted.
