“Ambica®” Automatic High Speed Injectable Powder Filling with Pick & Place type Rubber Stoppering Machine. Model: AHPF-250DS (Servo based – Advanced Model) Machine Operation: The Automatic High Speed Injectable Powder Filling with PNP type Rubber Stoppering Machine designed to fill Dry Injectable Powder with Different Weight in Different Sizes of Sterile Vial and Rubber stop the same in Dual track with 2 Powder Wheels and Hoppers. This machine works on Vacuum based Filling principle giving guarantee of High Filled Weight Accuracy with minimal spillage, giving output of 200-220 Vials per minute on single dose of 1.5gms with rubber stoppering, depending upon Nature, Density and Fill Weight of Powder and size of Vial and Rubber Stopper. *Image for Referral Purposes Only Input Specifications : Vial Size 2 ml to 30 ml Diameter 16 mm to 36 mm Height 26 mm to 75 mm Rubber Stopper 20 mm (Grey Butyl) *Above mentioned size will run in machine with the help of change parts. Basic Machine Preset with:  cGMP Model  A.C. Frequency Drives.  PLC with 7” Touch Screen HMI.  Change parts Suitable for One Size of Vial and Rubber Stopper.  Fitted with Powder Wheel Model AP-1500 suitable for filling 250 mg. to 1.5 Gram Powder in Single Stroke, with the help of Different Size of Pistons.  Fitted with One set Piston Suitable for any One Size of Fill Range.  Inbuilt 48” In feed & 36”Out feed Turn Table.  Pure Air Filter: 5” SS Filter for Air and 10” PC for Vacuum.  Online Pre - Media Filling Arrangement with SS316L NRV Syringes  Pre & Post Gassing Arrangement  Vacuum Pump – 500 LPM  Toughened Glass Safety Cabinet Salient Features:  Advanced Electronic Transmission System for filling which eliminates all the change parts required for multiple dosing.  Servo based Pick & Place type Rubber stoppering system  Rejection System for No Rubber Stoppers on Vial.  All contact parts are easily removable for Autoclaving / Sterilization.  PLC & HMI System for Machine Operation.(Make: Delta)  A/C Frequency Drive for speed control. (Make: Schneider)  Machine Equipped with High Quality Motor & Gear Box. (Make: Rotomotive)  Individual drives for Scrambler & Un-Scrambler to match the speed of filling and sealing.  Pure Air Filter: 5” SS Filter for Air and 10” PC for Vacuum.  Online Pre - Media Filling System with NRV Syringes  Pre & Post Gassing System  Vacuum Pump – 500 LPM with NRV Valve  Flush Mounted Gauge & Regulator for easy setting.  Separate D.C Controller for Vibratory Rubber Stopper System.  All the parts coming in contact with Powder are made of S.S 316L.  All Motors are provided with appropriate Contactors and Relays for the protection against any overload or jamming.  Multiple Dosing System through PLC  Safety clutch system to avoid vial breakage.  Temperature and Humidity Indicator.  Laminar Air Flow System to create Aseptic Environment. (Optional) Interlocks & Alarms:  No Vial – No Filling  No Vial – No Stoppering.  No Rubber Stopper in Schute – Machine Stop System.  No Rubber stopper on Vial – Vial Rejection system.  Low Vacuum – Machine Stop  Low Air – Machine Stop  Low Nitrogen – Machine Stop  Door Open Machine Stop  Powder Level Sensors (Optional)  Powder Loader of Butterfly valve with SS316 canister(Optional)  LAF stop – Machine Stop System. (Digital Input will be provided with machine)  Low LAF Velocity – Machine Stop System. (Digital Input will be provided with machine)