Dissolution Media Degasser

OVERVIEW

The Smart Fill 5000 is Compact, Transportable and offers quick and easy preparation of up to 10 litres dissolution media in less than 15 minutes. In a single pass the media for dissolution tests can be precisely heated, degassed and filled gravimetrically into vessels. Foaming media like SDS (Sodium Dodecyl Sulphate) can also be used.

Integrated Dosing port . Optional Remote Filling Hand to fill the media Directly into the Dissolution Tester Vessel using Dedicated Switch FLUSH,START,STOP, WASH

KEY HIGHLIGHTS

Smart Design

Microprocessor Controlled Touch Screen Display with Easy to use Interface allows User to Program all Important Function like Heating ,Vaccum Degassing.

Smart Sensor

Will detect the jars and Only Dispense Media only if Jar is placed in Position of Dispense.

In Line Heating

It Helps Avoid Time Delays associated with Convectional heating Method.The System is ready to prepare Media immediately upon on power up.

Piston Controlled Vacuum Chamber

for Highly Effective De-aeration and Precise Media Volume.

Variable Dispense Volumes

Variable Dispense Volumes of 200ml to 1000ml.

Dispensing Method

Volumetric and Gravimetric.

Validation and calibration

Inbuilt for temperature and volume.

Quick Documentation

Quick Documentation Via Mobile Thermal Printer

Read more

Product : Smartfill 5000

Function: Heating and Vacuum Degassing

Pharmacopeia Conformance: USP, EP

Control: Smart Touch Panel 7"

Time Needed for Degassing: 1000ml in less than 110 sec.

Dispensing Volume: 200 ml to 1000 ml to 200g to 1000g.

Dispensing time: 1000ml in less than 110 secs at 41°C in ambient temperature.

Heating Capacity: Up to +20°C deg. increase from Ambient Temperature to Max of up to 45°C

Input Filter: 25 mm in-line filter holder

Dispensing Accuracy: ±1% of set volume, but not less than ±5 ml

Degassing: Up to a maximum of 3.0 ppm, to a level of not less than 5.0 ppm

Temperature Control: Cartridge Heater

Temperature Accuracy: ± 2°C

PC Interface: RS-232 (serial) & Thermal Printer

Height: 32.28" (82 cm)

Width: 15" (38 cm)

Depth: 17.32" (44 cm)

Weight: 37.0Kg

Electrical Power: 220V ± 15V 50Hz 8Amps

Operating voltage pre-set at factory

PARTS & ACCESSORIES

Replacement Tubing Kit. Includes 7.5 Feet of 1/4 Inch Polyethylene (Part No: QMD20001)

Tubing and 1.5 Feet of 1/4 Inch Viton Tubin (Part No: QMD20002)

Main Overlay (Part No: QMD20003)

Dispensing Tip (Part No: QMD20004)

1/4 Inch NPT Thread Insert Connected to Dispensing Tip (Part No: QMD20005)

Dispensing Tip (Part No: QMD20006)

Wash Tubing Assembly (Part No: QMD20007)

Filter Holder (Part No: QMD20008)

DC Motor and Wiring Assembly (Part No: QMD20009)

FEP Encapsulated O-Ring for Piston (Part No: QMD20010)

Heater and Thermocouple Including Wiring Assembly (Part No: QMD20011)

Temperature Sensor Including Wiring Assembly (Part No: QMD20012)

Encoder and Limit Switch Including Wiring Assembly (Part No: QMD20013)

Upper and Lower Solenoid Valve (Part No: QMD20014)

Upper Solenoid Valve (Part No: QMD20015).

Drive Belt (Part No: QMD20016)

Remote Dispensing Nozzle. Includes Remote Dispensing Unit, Hose and Control Cable (Part No: QMD20017)

Hose and Control Cable (Part No: QMD20018)

Mobile Cart (Trolley) (Part No: QMD20019)

QUALITY LAB SOLUTIONS

QUALITY LAB SOLUTIONS
Manufacturer
India

Primary focus area

Analytical Products & Services

Add to Favourite
Book a Demo