The NKPF-250 D, a variant of automatic injectable dry powder filling machine with rubber stoppering, boasts of improved performance and high production rates. It performs very precise operations having an accuracy of ±1%. This accuracy is dependent on the consistency and the uniformity of bulk density of injectable powder under controlled humidity level.
The production rate of NKPF-250D dry powder filling machine shows an increased value as compared to some of the other variants. The powder filler has a rate of 240 fills/min for single dose and 120 fills/min for a double dose. For a triple dose, the machine is capable of doing 80 fills/min whereas for four dose, it is 60 fills/min. The conveyor height can be adjusted from 900 to 950 mm and the vial sizes ranging from 5 ml to 30 ml can be incorporated with the powder filling machine.
| Model No. | NKPF - 250D |
|---|---|
| Direction | Left to Right |
| Production Rate | Up to 240 Fills /Min. for single dose. Up to 120 Fills /Min. for double dose. Up to 80 Fills /Min. for triple dose. Up to 60 Fills /Min. for four dose. |
| Fill Capacity | 50 Mg to 1.5 Grms. single dose (with change parts).1.5 Grms. to 6 Grms. double, triple and four dose. Fill range depending upon vial opening and bulk density of powder. |
| Accuracy | ±1% depending upon consistency and the uniformity of bulk density of injectable powder under controlled level of Humidity (i.e. 25%). |
| Electrical Supply | 3.0 HP |
| Power Requirement | 415 Volts, 3 Phase (4 Wire System), 50 Hz. |
| Height of Conveyor | Adjustable from 900 to 950 MM |
| Dimensions | 3760 MM (L) x 1000 MM (W) x 1740 MM (H) |
| Net Weight | 1050 Kgs. (Approx) |
| Gross Weight | 1550 Kgs. (Approx) |
| Fill sizes | 50 mg. to 6 grms |
| Vial Sizes | 5 ml. to 30 ml. |
| Rubber Stopper Sizes | 20 mm |
